| 機械型號 Machine Type | Unit | ZL-450 | ||
| 射出系統 | 螺杆直徑 | Sctew Diameter | mm | 50 |
| 射出壓力 | Injection Pressure | kg/c㎡ | 980 | |
| 理輸射出容量 | Theoretical Shot Volume | cm3 | 270 | |
| 射出量（PS） | Max、shot Weight | g/oz | 245/8.5 | |
| 螺杆行程 | Screw Stroke | mm | 140 | |
| 螺杆轉速 | Screw Speed Max. | rpm | 0-175 | |
| 射嘴接觸力 | Nozzle Contact force | tons | 3.9 | |
| 射嘴行程 | Nozzle Retraction Stroke | mm | 150 | |
| 溫度控制段數 | Number of Temperature | ﹣ | 4 | |
| 鎖模系統 | 鎖模力 | Clamping Force | tons | 55 |
| 開模力 | Opening force | tons | 13 | |
| 模板尺寸 | Platen Size | mm | - | |
| 模柱間距 | Distance Between Tie Bare | mm | - | |
| 最小模厚 | Min. Mold Height | mm | 175 | |
| 開模行程 | Opening Stroke | mm | 200 | |
| 最大開模距離 | Max.Open Daylight | mm | 375 | |
| 頂出力量 | Ejector Force | tons | 1.3 | |
| 頂出行程 | Ejector Stroke | mm | 75 | |
| 滑模系統 | 轉盤直徑 | Rotay Table Diameter | mm | |
| 转盘站數 | Slide Station | ﹣ | ||
| 最大模具重量 | MAX. Mold Weight | kg | ||
| 滑模定位精度 | Station Clearance | mm | ||
| 油壓電力系統 | 最大液壓壓力 | Max. Hydraulic Pressure | kg/c㎡ | 175 |
| 泵浦吐出量 | Pump Output | liters/min | 65 | |
| 動作油量 | Oil Reservoir Capacity | liters | 200 | |
| 冷卻水用量 | Cooling Water Consumption | liters/hr | 800-1000 | |
| 油壓馬達電力 | Pump Motor Power | kw | 11 | |
| 電熱容量 | Barrel Heating Power | kw | 5.5 | |
| 總用電量 | Total Wattage | kw | 16.5 | |
| 其它 | 機器重量 | Machine weight | tons | 3.1 |
| 機器外型尺寸 | Machine Dimensions(LxWxH) | m | 2.8*1.05*2.05 | |
| 付船重量 | Shipping Weight | tons | ||
| 付船尺碼 | Shipping Measurements(LxWxH) | m | ||
